|
 |
From: Lance (Energy Research)
Remote Name: 66.82.48.1
Date: 21 Aug 2003
Time: 00:04:39
Sending energy through the atmosphere without wires to it’s intended destination, this would solve the problem of high tension power lines or underground power lines on the grid. I would like to take this opportunity to pose an idea to deliver energy from one place to another without wires or transmission lines. Why? Well how about the transmission situation in California or the Black Out of 2003. And while this idea is not hardly a new concept, seeing as how Tesla spent many years of his life to no avail in coming up with an idea to do just that. You seeTesla was convinced that this could be done, although within his life time it was not accomplished, even though he had got funding to build a unit and he built it which was suppose to be able to send the energy. This is a picture of Tesla’s prototype http://www.teslascience.org/archive/descriptions/picture20.htm . This unit would send energy using ELF Extremely Low Frequency. When sending energy it is very hard to control. The problem if sending energy through the atmosphere is how to control it? After all lightening does not follow any pattern upon it’s way to a certain point. http://www.teslasystems.com/gallery/ . Imagine if the transmission lines in California could be sent without wires to the destination needed to give it to customers? Well then the famous black out of 2003 would not have been a “let’s See Who We Can Blame This Time, and Form a Friggin Committee” game being played. With the answer of course being not to fix the problem but to justify spending some 500 Billion in upgrading of the grid network, which is lacking and insufficient now. We know we can deliver energy by way of laser. The concept is not to awfully difficult to comprehend; http://physics.pdx.edu/~larosaa/Applied_Optics_464-564/Projects_Presented/Green_report.doc . http://www.fas.org/spp/starwars/program/abl.htm . Now then how do you send energy constantly without losing it to another destination? Here is a thought. Now then this idea will work in water as well using underwater lasers being tested in Florida now. Now these units can be used to find underwater mines and then seek and destroy. Here is the UK research being done; http://www.st-andrews.ac.uk/~bds2/elvis.html The US Navy is way ahead of this. Now then when a water walker moves across the water but does not fall in there is a reason it can do this. Why? http://www.webshots.com/g/25/37740-sh/33873.html Or should I say how? Well it is a matter of touching or skimming the surface of the water and creating small disturbances which spread outward. Just like when you drop a rock in a pond it sends circular waves outward. If such an event happens in the center of the water underwater then it is like a singularity and the disturbance goes in all directions in the form of an expanding sphere of disturbance. We know this from studying the water flow from depth charges when we used them against NAZI U-Boats in World War II. Any disturbance of this type sends waves pulsating outward from the center. Similar to the concept of a singularity or an above ground explosion. http://www3.sympatico.ca/slavek.krepelka/ttf2/wave1.htm and http://www-pord.ucsd.edu/~wryoung/reprintPDFs/margStab.pdf and http://radiojove.gsfc.nasa.gov/class/educ/elec_mag/material/waves.doc . When you drop a rock in an undisturbed pond you get waves, which move outward. When an event happens in the center of a fluid you get a sphere shaped wave moving outward. Now these things are all well known right? Okay now lets discuss an Triangular tube, Square tube and octagonal tube. We can see this in a simulation 3-D computer model something like this; http://www.mems.rice.edu/TAFSM/AHPCRC9498/bulletins/v4n4/mesh/ . Now then in each of the points of triangle or square or whatever shape you pick, there will be a laser beam. The laser will align with the end point of the same shape. These lasers will pulsate and be synchronized. Each time the lasers on the points pulsate they will be sending inward and outward the same type of disturbance that the rock on the lake does or a better explanation would be the sphere shaped expanding disturbances. The Power transfer laser would be shot directly through the center of the pulsating lasers in parallel direction. The pulsating lasers will keep the laser aligned so that it does not escape or find another source along the way to discharge to. It therefore flows straight to the end source. If the pulsating lasers fail the power is turned off. The power laser can turn on and the disturbances it makes originally will turn on the pulsating laser. As the power is increase the pulsating lasers will increase their numbers of pulses per nano second. The pulsating lasers will be a much lower power and can even flow the other direction. Each pulse pushes the power laser into a more confined and concentrated state to lesson any lost power. Currently Power Transmission lines lose power in that transmission, sometimes the transmission loss can be significant http://www.ansoft.com/hfworkshop03/Andy_Byers_Tektronix.pdf and if a transformer is out, deadly and even release gases into the atmosphere which is 18,000 times worse on the ozone than any other green house gas that is emitted. Sending a powerful energy source controlled by pulsating lasers at the boundary of where you wish to confine the power too. Just an idea. Why would a guy who washes cars care about sending power guided by pulsating lasers? Why would tow guys who are bicycle mechanics care about flying through the air? http://www.aircraftwashguys.com
|
|
©Copyright 1996-. All rights reserved.
Site hosted by CCG
Site design by CCG Studio
DISCLAIMER:
Although we exert control over all articles written by our staff and
consultants, we are in no way able to assure the accuracy of any content generated by our
readers. Any information or advice provided by our readers should be used
cautiously, and should be considered as an opinion of such, and not the views, ideas,
opinions, or advice of Washguy.com. Washguy.com., its staff, and consultants
shall in no way be held liable or responsible for any false or misleading information or
injurious advice obtained from our readers, including any information posted to this
Bulletin Board forum. Any information or advice obtained from other readers
through Bulletin Board postings shall be used at the reader's own risk. The
Bulletin Board forum functions as a discussion group for the exchange of views,
information and opinions on issues related to the Car Wash Guys, Franchising and their
associated topics. Washguy.com, its staff, and consultants will not be held
liable for any incidental or consequential loss or damage sustained as a result of this
information or advice. No user shall be entitled to claim detrimental
reliance on any views received from the staff, consultants or other readers.
By using this Bulletin Board and it's related forums, you agree to indemnify and hold
Washguy.com, its staff and consultants harmless from any claims arising as a result of
your use of the information or materials you download from or upload to the Bulletin
Board.
