Home | Contents | Search | Post
 |
From: Lance (Automotive Business Model Research)
Date: 19 Apr 2003
Time: 02:38:10
Compression Check-Up, Compression Checks as Part of Your Market Mix for your automotive shop or reapair station? ---- Think of it as a chest X-ray for your engine. At some point in the restoration process, the engine will come into question—to rebuild or not to rebuild. An engine rebuild is a lot of work, and to do it right costs a lot of money. You certainly don't want to do it if the engine is internally in good condition. That $3,000-$5,000 could go for a new paint job, new chrome or even some rare number-matching parts you may be missing. Answering the usual diagnostic questions such as "How many miles are on it? How much oil does it use? Is it down on power?" will help with the decision, but a simple 30-minute compression test can answer a lot of questions if you know what to look for. --- Cylinder Pressure --- The key to any internal combustion engine is cylinder pressure. Power and efficiency depend on strong compression and the ability to contain the combustion pressure in the cylinder. Ideally, this intense pressure from the burning air and fuel will not escape past the piston rings or valves, exerting maximum force down on the pistons, rotating the crankshaft. All factory-assembled engines have a cranking compression specification that you can test your engine against to determine what condition its internal parts such as piston rings, valves and head gaskets are in. You can find these cranking compression specifications listed in repair manuals and sometimes in the owner's manual. If your engine has been modified with a different camshaft or cylinder heads, the stock specs are meaningless. Still, a compression test will provide a good indication of the condition of the engine by comparing one cylinder to another. ---- The Test ---- The test is simple. A compression test gauge (similar in concept to a tire pressure gauge) is screwed into the sparkplug hole. The engine is turned over several times (but not started) with the starter, and the gauge records the pressure in p.s.i. generated by that cylinder. All cylinders are checked, then the numbers are compared to the factory specification and each other. The general rule is that the lowest cylinder should test a minimum of 80 percent of the best cylinder. However, if the test numbers are consistently 10 percent down from factory spec, it's time to start setting aside the budget for a rebuild. ----- If you want your engine to perform well and maintain it's compression ratios be sure to use the Oil Change Guys Services Regularly, Order Service today at: http://www.oilchangeguys.com --- An engine in new condition typically should indicate a compression number of 200 p.s.i. When testing our engine, all cylinders check out at 165 p.s.i. plus or minus 10 p.s.i. What you can deduct from this is that the engine is about at 80 percent of its original capability with pretty even wear in each cylinder. Time for a rebuild! If only one or two cylinders had low readings and all of the others were up around 200, then you could deduce that those cylinders had unique problems such as burned valves or a camshaft going flat. If the sparkplugs were oil fouled you could pin the problem possibly on broken rings. Even more telling—if the two low reading cylinders are next to each other it could be a blown head gasket between the two cylinders. ----- Although a compression test gauge is not a definitive trouble-shooting tool by itself, it will definitely tell you if an engine is in sound condition or not, and in the hands of an experienced mechanic it will quickly lead you to the source of the trouble. If you are about to purchase a used vehicle and have doubts about the condition of the engine, it's a wise move to purchase a $30 compression gauge at a local parts store and do the test. ----- Thanks in part to Leonard Emanuelson/autoMedia.com for his help in this article, for more articles of this nature check their web site. Other great automotive Web sites include: http://www.CarwashGuys.com and http://www.Detailguys.com . For Trucking we recommend http://www.truckwashguys.com and http://www.tractorwashguys.com . Keeping your engine clean on the inside and out side will keep it running cool and like a top.
|
©Copyright 1996-. All rights reserved.
Site hosted by CCG
Site design by CCG Studio
DISCLAIMER: Although we exert control over all articles written by our staff and consultants, we are in no way able to assure the accuracy of any content generated by our readers. Any information or advice provided by our readers should be used cautiously, and should be considered as an opinion of such, and not the views, ideas, opinions, or advice of The Oil Change Guys. The Oil Change Guys., its staff, and consultants shall in no way be held liable or responsible for any false or misleading information or injurious advice obtained from our readers, including any information posted to this Bulletin Board forum. Any information or advice obtained from other readers through Bulletin Board postings shall be used at the reader's own risk. The Bulletin Board forum functions as a discussion group for the exchange of views, information and opinions on issues related to The Oil Change Guys, and their associated topics. The Oil Change Guys, its staff, and consultants will not be held liable for any incidental or consequential loss or damage sustained as a result of this information or advice. No user shall be entitled to claim detrimental reliance on any views received from the staff, consultants or other readers. By using this Bulletin Board and it's related forums, you agree to indemnify and hold The Oil Change Guys, its staff and consultants harmless from any claims arising as a result of your use of the information or materials you download from or upload to the Bulletin Board.